Magnet: Oxford long hold 7.05 T, narrow bore 51 mm, 13 room temperature shims
Console: two rf channels covering frequency ranges 12-309.5 MHz, 299.5-300.5 MHz
Host computer: Sun Ultra 30, Solaris 7
NMR Software: VNMR 6.1C
Probe: 5 mm, 4 nucleus switchable 1H/19F/31P/13C, VT compatible -100 to +150 oC
Additional accessory: SMS autosampler (Zymark) with a maximum capacity of 50 samples
Plotter/Printer: HP LaserJet 2200D
Magnet: Oxford long hold 7.05 T, narrow bore 51 mm, 13 room temperature shims
Console: two rf channels covering frequency ranges 12-309.5 MHz, 299.5-300.5 MHz
Host computer: Sun Ultra 30, Solaris 8
NMR Software: VNMR 6.1C
Probes: a) 5 mm broadband 15N-31P, 1H or 19F decoupling
b) 10 mm broadband 15N-31P, 1H decoupling, without 11B background signal
c) 10 mm broadband low frequency 14-31 MHz 39K-15N, 1H decoupling
All probes are VT compatible -100 to +150 oC
Plotter/Printer: HP LaserJet 4
Magnet: Bruker actively shielded 9.39 T, narrow bore 54 mm, 20 room temperature shims
Console: two rf channels covering frequency ranges 1H-19F and 6-242 MHz, respectively, with the
capability of selective excitation, pulsed field gradient (PFG) module GRASP II/A, HR MAS
accessory
Host computer: HP xw4200, RHEL 4
NMR Software: TopSpin 1.3, pl 6
Probes: a) Nalorac 5 mm broadband 15N-31P, 1H or 19F decoupling, without 11B background
signal, Z-PFG 100 G/cm, VT compatible -80 to +130 oC
b) Nalorac 5 mm ID 1H-19F/15N-31P, Z-PFG 100 G/cm, VT compatible -80 to +130 oC
c) Bruker 4 mm HR MAS 1H/13C, Z-PFG 45 G/cm, VT compatible -20 to +70 oC
Plotter/Printer: HP LaserJet 4050
Magnet: Bruker UltraShield Plus 9.39 T, narrow bore 54 mm, BOSS-1 20 shim system, BSMS shim and
digital lock control units
Console: two rf channels, BLA2BB broadband amplifier system, PFG module GRASP II, BVT-3200 VT
control unit, automatic tuning and matching accessory
Host computer: HP xw4300, Windows XP SP2
NMR Software: TopSpin 2.0, pl 5
Probes: a) 5 mm broadband (BBFO) 15N-31P and 19F observe, 1H decoupling, Z-axis PFG, VT compatible
-80 to +130 oC
Additional accessory: B-ACS automatic sample changer with a maximum capacity of 120 samples
Plotter/Printer: Cannon Jet Printer
Magnet: Oxford 11.74 T, narrow bore 51 mm, 28 room temperature shims
Console: four rf channels: frequency ranges 499.5-500.5 MHz, 20-600 MHz, 20-300 MHz, and 20-300
MHz, respectively, all channels are equipped with waveform generators, PFG module Performa
XYZ, deuterium automation module
Host computer: Sun Ultra 30, Solaris 8
NMR Software: VNMR 6.1C
Probes: a) 5 mm broadband 15N-31P, 1H decoupling
b) 5 mm triple resonance 1H/13C/15N, X/Y/Z-axis PFG, VT compatible 0 to +50 oC
c) 5 mm dual 1H/19F
d) 5 mm inverse detection 1H-19F/15N-31P
e) 10 mm broadband 15N-31P, 1H decoupling
f) 16 mm broadband 15N-31P, 1H decoupling
The probes a), c) - f) are VT compatible -100 to +150 oC
Plotter/Printer: HP-LaserJet 4000T
Magnet: Oxford 14.09 T, narrow bore 51 mm, 28 room temperature shims
Console: three rf channels: Direct Drive architecture, complete waveform shaping capability, channel 1
high band (1H/19F), channels 2 and 3 low band (20-245 MHz), PFG module Performa IV,
automatic tuning and matching accessory,
Host computer: Dell Precision 390N, RHEL 4
NMR Software: VNMRJ 2.2C
Probes: a) 5 mm 1H-19F/15N - 31P AutoX dual broadband, Z-axis PFG, VT compatible -80 to +130 oC
b) 5 mm 1H/13C/15N-31P tunable triple resonance, Z-axis PFG, VT compatible -100 to +130 oC
c) Nalorac 3 mm 1H / 13C dual, VT compatible -100 to +150 oC
Plotter / Printer: HP LaserJet 2200D
Magnet: Bruker UltraShield 16.45 T, 54 mm bore, BOSS-2 34 shim system, BSMS shim and digital lock
control units
Console: four rf channels, linear amplifier BLAXH 500/100, two linear broadband amplifiers BLAX 500,
PFG module GRASP III, BVT-3000 VT control unit with BCU-5 pre-cooling accessory
Host Computer: HP xw4100, RHEL 3
NMR Software: TopSpin 1.3, pl 4
Probes: a) 5 mm inverse triple resonance (TCI) 1H/13C/15N, Z-axis PFG, VT compatible 0 to +60 oC
b) 5 mm inverse triple resonance (TXI) 1H/13C/15N, Z-axis PFG, VT compatible -50 to +80 oC
Plotter / Printer: HP LaserJet 1300
Magnet: Bruker UltraStabilized and UltraShield 18.79 T, 54 mm bore, BOSS-2 34 shim system, BSMS
shim and digital lock control units
Console: four rf channels, linear amplifier BLAXH 500/100, two linear broadband amplifiers BLAX 500,
PFG module GRASP III, BVT-3000 VT control unit with BCU-5 pre-cooling accessory,
automatic tuning and matching accessory
Host Computer: HP xw4200, RHEL 4
NMR Software: TopSpin 2.0, pl 5
Probes: a) 5 mm inverse triple resonance (TCI) 1H/13C/15N, Z-axis PFG, VT compatible 0 to +60 oC
b) 5 mm inverse triple resonance (TXI) 1H/13C/15N, Z-axis PFG, VT compatible -50 to +80 oC
c) 5 mm broadband (BBO) 15N-31P, 1H decoupling, Z-axis PFG, VT compatible -150 to +150 oC
Plotter / Printer: HP color LaserJet 2550n, HP LaserJet 1320
Magnet: Bruker 7.05 T, superwide bore 150 mm, 13 or 20 room temperature shims depending on
gradient coil used
Console: two RF channels covering frequency ranges 1H-19F and 6-242 MHz, respectively.
Host computer: HP xw4100, RHEL 3
NMR Software: ParaVision 3.0.2, XwinNMR 3.5 pl 6
Probe: a) Micro 2.5 gradient coil producing up to 100 Gauss/cm with 2.5 mm, 5 mm, 10 mm, 15 mm, 20 mm, 25 mm, 30 mm, 35 mm 1H RF coils, VT compatible -50 to +100 oC.
b) Mini 0.36 gradient producing up to coil 14 Gauss/cm with 60 mm 1H RF coil.
Additional accessory: CardioGuard, providing respiratory and cardiac gating; FTS 40 air cooling unit.
Plotter/Printer: HP LaserJet 4050