Text Information

The second edition of Measurements and Data Analysis for Engineering and Science was published by Taylor & Francis / CRC Press (ISBN: 9781439825686) on January 6, 2010. The first edition is now out of print, although some copies still may be available on Amazon. Those interested in the new second edition should contact Jonathan Plant, Senior Editor - Mechanical, Aerospace, Nuclear & Energy Engineering, Taylor & Francis / CRC Press, at jonathan.plant@taylorandfrancis.com.

University of Notre Dame 'Measurements' Course Link: Spring Semester
AME20213 (Measurements) is taught within the Department of Aerospace and Mechanical Engineering during the Spring semester by Professor Patrick Dunn

University of Notre Dame 'Measurements' Course Link: Fall Semester
and during the Fall semester by Professor David Go.

2nd Edition Errata
This document is the errata for the 2nd edition of the text.

1st Edition Preface
This document is the preface of the 1st edition of the text.

Unit Conversion Tables
This document contains the six unit conversion tables from Appendix C and the two tables on the inside left front cover of the 1st edition of the text.

MATLAB Reference Site
This is the MATLAB reference site of the text.

MATLAB Sidebars
This document presents all of the MATLAB Sidebars that were in the 1st edition of the text.

MATLAB Files
This zip file contains all of the Matlab files that are referred to in the text.

New MATLAB File
This m-file, jcaleyIII.m, is a revision of caleyIII.m to allow for automatic axis scaling.

Learning Objectives
This document is Appendix D of the 1st edition of the text.

Review Puzzles and Solutions
This document presebnts the review crossword puzzles and their solutions (Appendix F) of the 1st edition of the text.

Laboratory Exercises
This document is Appendix H of the 1st edition of the text.

Differential Equation Derivations
This document is Appendix I of the 1st edition of the text.