Assembler for the 6-Instruction Processor from Chapter 8 of "Digital Design" (DD) by Frank Vahid, John Wiley and Sons, First Edition, 2006, www.ddvahid.com. Copyright (c) 2007 Frank Vahid. Permission for educational use granted to all students and to instructors requiring DD for a course. Any other use requires explicit author permission.

To use:

  1. Write/modify/paste assembly code (to be safe, keep a copy elsewhere).
  2. Press "Assemble" button to generate machine code.
  3. Press "Step" to execute one instruction, press step again to execute next instruction.
    Press "Reset" to reset the instruction simulator





Instruction Set
Name Opcode Instruction Description
Load 0000 MOV Ra, d Load data from memory location d into register a.
Store 0001 MOV d, Ra Store data from register a into memory location d.
Add 0010 ADD Ra, Rb, Rc Add register b and register c and store the result in register a.
Load Constant 0011 MOV Ra, #c Load the constant c into register a.
Subtract 0100 SUB Ra, Rb, Rc Subtract register c from register b (RF[b] - R[c]) and store the result in register a.
Jump if zero 0101 JMPZ Ra, offset Set the program counter (PC) to PC + offset if register a is 0.
Assembly code notes: Each instruction should end with ";". Any instruction may begin with a label-- "label:". Constants must be decimal numbers.