Next: What you should have
Up: Tasks
Previous: In-lab Tasks:
- Use the experimental data (In-lab task 3) to assess
the performance of the PWM signal generator you designed in
the pre-lab. Graph the experimentally observed duty cycle
versus the commanded duty cycle.
- If you had to redesign your program (in-lab task 4),
then explain why the original design was not acceptable and
how your modified design addresses the problem.
- For the data you gathered in In-lab task 4, plot the
measured duty cycle as a function of the commanded duty
cycle. Assess the degree to which your new design
addresses the problem.
- Demonstrate the functionality of your completed
system to the TA.
Michael Lemmon
2009-02-01